BASIRA proposal: AI-assisted CCTV design review
Proposal · Concept

One digital, AI-assisted workspace to prepare and check security designs before they go to SIRA.

In the proposed design, licensed security companies would prepare CCTV, access-control, alarm and HVM layouts in one place, run automated checks against SIRA requirements and fix issues before submitting through SIRA’s own process — with AI coverage analysis, rule checks and a full audit trail. BASIRA is a proposal: it is not operated by, affiliated with or endorsed by SIRA, and it does not issue approvals.

In short

BASIRA is Swedish Technology’s proposal for an AI-assisted platform that checks CCTV, access-control and alarm designs against SIRA requirements before submission — coverage and blind spots, pixel density at critical points, storage retention and permitted camera models. It is a concept, not a live service: approvals are issued only by SIRA, and Swedish Technology is not a SIRA-approved installer.

Proposal · Section 1

Executive Summary

The proposal describes how the review of security-system designs (CCTV / access / alarm / HVM) in Dubai could be supported by AI: fewer avoidable design errors, consistent checks and a complete digital record — while approval decisions stay with SIRA.

Proposal · Section 2

Proposed Objectives

Targets the proposal is designed around — not measured results.

-50%

Approval cycle time

Reduce end-to-end project approval time by at least 50%.

Lower

Design-error rejections

Cut rework and rejections caused by avoidable design errors.

1.0

Unified review standards

Standardise review criteria across all reviewers and inspectors.

-30%

Inspector workload

Lower the field-inspection workload through digital pre-validation.

Proposal · Section 4

Scope

In Scope
  • Security project registration
  • Camera layout design studio
  • AI-driven compliance analysis
  • Electronic submission & approval workflow
  • Digital field inspection
  • Certificate issuance (by SIRA, if adopted)
Out of Scope (Phase 2)
  • Operational violation management
  • Individual licensing management
Proposal · Section 5

Business Process Flow

From project registration to final certification — one continuous, digital, audited path.

01

Project Registration

02

Design Studio

03

AI Analysis

04

Electronic Submission

05

Reviewer Decision

06

Revision (if required)

07

Field Inspection

08

Final Certification

CAD design workflow
FR-03

Design Studio — CAD, BIM and 2D drawing in one place

Companies upload existing CAD / PDF / BIM files or draw 2D camera layouts directly inside the platform. Device choices would be limited to SIRA’s approved product list, with mandatory inputs for height, tilt angle, lens and ingress protection.

  • Upload of CAD, PDF and BIM source files
  • Native 2D drawing & annotation tools
  • Approved-camera catalogue enforced
  • Mandatory device parameters captured up front
SRS · Section 2

Functional Requirements

FR-01

Company Registration

  • Only SIRA-licensed companies may register
  • SIRA licence verification via API
  • Account linked to commercial-licence number
FR-02

Project Creation

  • Capture facility type, area, floors, location
  • Automated risk classification
  • Geographic mapping of every project
FR-03

Design Studio

  • Upload CAD / PDF / BIM
  • 2D camera layout drawing
  • Approved camera catalogue only
  • Mandatory height / tilt / lens / IP rating
FR-04

Auto Compliance Engine

  • Entry / exit coverage check
  • Pixel density & FPS ≥ 10 validation
  • Storage retention check
  • LPR coverage at parking
  • Approved-model enforcement
  • Score, error list, recommendations
FR-05

Submission Workflow

  • Design lock on submission
  • Auto PDF generation
  • Fee calculation
  • Reviewer routing
FR-06

Review Dashboard

  • Interactive layout viewer
  • Inline comments
  • Approve / Reject / Conditional
  • Time-stamped audit log
FR-07

Inspection App (Mobile)

  • View approved layout offline
  • Mark installed cameras
  • Capture proof photos
  • GPS comparison with design
  • Field notes & deficiencies
FR-08

Certification

  • Electronic certificate issuance
  • QR code & digital hash
  • Tamper-evident archive
  • Long-term retention
FR-04 · AI

Automated checks — issues, likely rejections and required fixes flagged in seconds

Every layout would run through an AI-driven rule engine that checks it against SIRA technical requirements before a reviewer sees it. The engine returns a Compliance Score, a structured list of errors and a list of automated recommendations the company can apply directly inside the design studio.

  • Coverage of all entries, exits and critical assets
  • Pixel density per metre and minimum FPS
  • Storage retention days enforcement
  • Independent control-room presence
  • Blocks selection of non-approved camera models
AI coverage compliance engine
SRS · Section 4 · AI

AI Technical Specification

AI-01

Coverage Simulation Engine

Inputs camera FOV plus floor plan; outputs a live coverage map with un-covered zones highlighted.

AI-02

Pixel Density Calculator

Calculates pixels per metre at every point and flags any zone failing the SIRA threshold.

AI-03

Blind-Spot Detection

Identifies un-monitored sectors and proposes optimal redistribution of cameras.

AI-04

Predictive Approval Model

Analyses historical project data to estimate the probability of approval or rejection up-front.

Field inspection app
FR-07 · Inspection

Mobile Inspection — the field becomes part of the digital record

Inspectors open the approved design on a tablet, mark every camera physically installed, capture proof photos and the system automatically compares the GPS-tagged installation against the approved coordinates. Notes and deficiencies feed back into the central review file.

  • Approved layout opens offline on the device
  • Photo proof tied to each device
  • GPS comparison with design coordinates
  • Inspector notes flow back into the review record
SRS · Section 3 · NFR

Non-Functional Requirements

NFR-01

Performance

  • Response < 3 seconds
  • 10,000 concurrent users
  • AI analysis < 60 seconds
NFR-02

Availability

  • 99.9% uptime SLA
  • Disaster recovery < 4 hours
  • Daily backups
NFR-03

Security

  • MFA & RBAC
  • AES-256 encryption
  • TLS 1.3
  • Full audit logs
  • Zero-Trust model
NFR-04

Compliance

  • UAE data residency
  • ISO 27001
  • GDPR-aligned
  • Dubai Government Standards
SRS · Section 1.1

Architecture Overview

Web-Based Cloud System

Multi-tenant cloud deployment with UAE data residency and on-prem option for sovereign environments.

Microservices

Independently scalable services for design, review, inspection, AI analysis and certification.

AI Processing Layer

GPU-accelerated AI services for coverage, pixel density, blind-spot and predictive approval.

Mobile Inspection Layer

Native Android and iOS application for field inspectors with offline-first sync.

Inside the Platform

Questions

Questions buyers ask

What is BASIRA?

BASIRA is Swedish Technology's proposal for an AI-assisted platform that checks CCTV, access-control and alarm designs against SIRA requirements before submission: coverage and blind spots, pixel density at critical points, storage retention and permitted camera models.

Is BASIRA an official SIRA system?

No. It is a Swedish Technology concept and proposal. It is not operated by, affiliated with or endorsed by SIRA.

Can BASIRA approve my CCTV project?

No. Approvals are issued only by SIRA through its official channels. BASIRA does not issue approvals or certificates.

Is Swedish Technology SIRA-approved?

No. We provide design review, analytics and software, and work alongside your SIRA-approved installer.

Where do I submit my project to SIRA?

Through SIRA's official services at sira.gov.ae.

Available today

What you can use now

BASIRA itself is a proposal, but the engineering behind it is available as services: CCTV design review against the applicable requirements before your SIRA-approved installer submits, and AI video analytics on installed cameras.

One platform concept. One standard. Designed around SIRA requirements.

Proposed for the security industry of Dubai — from project registration to a complete digital record, with AI-assisted design checks. Approval decisions remain with SIRA.